SpiderBot 2.0 assembly instructions

Yes , depending on your age and strength, you may need help from an adult.

This could be because of several reasons:

- Because your batteries are not new and/or a little weak.

I therefore invite you to insert new batteries .

- Because the orange sockets are too tight and your SpiderBot 2.0 is not mobile enough.

I therefore invite you to slightly loosen the sockets .

- Because the red and black wires are installed backwards.

I invite you to check the connection of the red and black wires using the explanations in the instructions and the assembly video.

- Because the worm gear and the gear are not in contact with each other.

I therefore invite you to push the worm gear more or less so that it is well engaged with the axle gear.

- Because your pulleys are not opposite each other.

I therefore invite you to check that the nipples of your pulleys are in opposite directions , one towards the rear and one towards the front (with the help of the explanations and images in the instructions as well as the assembly video in line).

- Because your legs are not correctly aligned with the pulley at the front.

I therefore invite you to realign your legs so that they are parallel to the pulley (following the instructions in the instructions and/or the online video).

- It is also possible that the installation direction of the legs is not correct.

I invite you to check the direction of installation of the legs using the explanations and images in the instructions and/or using the online assembly video.

This may be due to the installation of the connection wires from the battery box to the motor that are backwards.

I invite you to check the connection of the red and black wires using the explanations and images in the instructions as well as the online video.